BRAVIA does not appear on the screen of a Screen mirroring or Wi-Fi Direct compatible device

Check the following if BRAVIA is not displayed on the screen of your device that is compatible with either Screen Mirroring feature or Wi-Fi Direct feature:

For devices that are compatible with Screen mirroring
Please make sure that the input of the TV is set to Screen Mirroring .

For devices that are compatible with Wi-Fi Direct

• For 2014 models:
  Please make sure that Built-in Wi-Fi and Wi-Fi Direct settings are set to On. These settings can be changed from the menu of the TV.
  
  
• For Android TV:
  Please check Wi-Fi Direct is set to On by following:
  
• 1. Press the Home button on remote and select Settings.
  2. Select Network in the NETWORK & ACCESSORIES category.
  3. Select Wi-Fi Direct
  4. Select On.
     
     After checking, please select Wi-Fi Direct Settings.

If the steps above did not resolve the issue, follow the steps below:

• For 2014 models:
• 1. Make sure the TV and wireless router (access point) are not connected using a 12 or 13 channel frequency. If the wireless channel are set to that frequency, BRAVIA will not appear on the compatible devices.
     
     NOTE: Contact your Internet Service Provider (ISP) for assistance with verifying this setting.
     
     
  2. Change the wireless channel frequency of your wireless router between 1 ch and 11 ch.
     
     NOTE: Refer to the manual of your wireless router for detailed information regarding how to change the wireless channel frequency.
     
     
• For Android TV:
  If the TV is connected to the network by wired LAN, please change the connecting channel between 1ch-11ch by following:
  
• 1. Press the Home button on remote and select Settings
  2. Select Network in the NETWORK & ACCESSORIES category.
  3. Select Wi-Fi Direct
  4. Select Advanced settings
  5. Select Band setting
  6. Select Manual.
  7. Select a Channel.