My speaker makes an error noise and won't play music when I press the Push & Play button (LSPX-S2)

IMPORTANT: This article applies only to specific products and/or operating systems. Check Applicable Products and Categories for details.

An error noise may occur on your LSPX-S2 Wireless Glass Sound Speaker, and playback may not be possible due to network status or Spotify settings and response conditions:

• The Spotify Connect function has never been used.
• The speaker isn't connected to a Wi-Fi network.
• The speaker uses the Speaker Add function.

Check if playback works after completing each step:

1. Power reset the speaker.
   • Turn off the speaker.
   • Turn on the speaker again.
   • At the bottom of the speaker, press the (Push & Play) button.
      
2. Make sure the (Push & Play) indicator is on.
   • Press the BLUETOOTH/ PAIRING button.
     • If the (Push & Play) indicator is off, press the (Push & Play) button.
        
3. Check the status of Spotify Connect using the Spotify app.
   • If it isn't set to playback on this unit, open Connectable Devices and select this unit again.
      
4. Make sure that the tracks (artists, albums, etc.) registered to Favorite music with the (Push & Play) button aren't set to Don’t play in the Spotify app.
   • Cancel the Don’t play setting or register new tracks to Favorite music.