Article ID : 00075703 / Last Modified : 25/09/2017

Remote codes for Set-Top box or A/V receiver don't work when setting up the IR blaster

Applicable Products and Categories of This Article

Please try the following if the codes in the IR blaster setup don't work.

Set-top box

  • Press Home button on the remote control and select Settings > External Input > IR Blaster setup > Set-top box > Input Manufacture name > Model Number Search.

AV receiver

  • Press Home button on the remote control and select Settings > External Input > IR Blaster setup > AV receiver > Input Manufacture name.


If you cannot find out your Set-Top box or AV receiver, then it is not supported for use with the IR blaster. In this case, use the remote control supplied with the set-top box or A/V receiver to operate it.