Article ID : 00086023 / Last Modified : 06/06/2014

How can I run the “DAB Auto Tune” manually?

Applicable Products and Categories of This Article

Follow the steps below to start the DAB Auto Tuning.

1. Hold down the RADIO DAB/FM-SCAN button until "INITIAL" and "SCAN?" appears alternately on the display.

2.  Press ENTER.

Image
3. Scanning will start.

Image

Depending on the DAB/DAB+ services available in your area, the scanning may take a few minutes.
When scanning is complete, a list of available services is created.

Notes: The currently stored list of available services will be cleared once the DAB auto tune process has started.
If your country or region does not support DAB/BAB+ broadcasts, "NO SIGNAL" appears on the display.