How to adjust the date and time on the TV

With the TV receiving a broadcast signal or connecting to the network, follow these steps to check the setting:

1. Open the Settings screen. How to access Settings
   • If the remote control has a Quick Settings ( or ) button, press the Quick Settings button and select Settings.
   • If the remote control does not have a Quick Settings ( or ) button, press the HOME button and select Settings.
2. The next steps will depend on your TV menu options:
   • Select System → Date & time → Automatic date & time → Automatically adjusts the time provided by your network or broadcast.
   • Select Device Preferences → Date & time → Automatic date & time → ON, Use broadcast time, or Use network time.
   • Select Date & time → Automatic date & time → ON, Use broadcast time, or Use network time.

• The available options can vary depending on the TV.
• If your TV has the Time synchronization setting in Date & time, set it to Use broadcast provided time or Use network-provided time.

If the time is not displayed correctly, there is a possibility that the Time Zone setting is not correct. Follow these steps to check the setting:

1. Open the Settings screen. How to access Settings
   • If the remote control has a Quick Settings ( or ) button, press the Quick Settings button and select Settings.
   • If the remote control does not have a Quick Settings ( or ) button, press the HOME button and select Settings.
2. The next steps will depend on your TV menu options:
   • Select System → Date & time → Set time zone.
   • Select Device Preferences → Date & time → Time → Set time zone.
     Note: If Time is not shown, select Set time zone.
   • Select Date & time → Set time zone.
   • Select Date & time → Time → Automatic time zone → Off, then select Set time zone.
3. Select your location.

Note: If you use a special network environment such as a VPN, the time on the TV may differ from the time of the location (area) where the TV is located.

1. Open the Settings screen. How to access Settings
   • If the remote control has a Quick Settings ( or ) button, press the Quick Settings button and select Settings.
   • If the remote control does not have a Quick Settings ( or ) button, press the HOME button and select Settings.
2. The next steps will depend on your TV menu options:
   • Select System → Date & time → Automatic date & time → Off.
   • Select Device Preferences → Date & time → Automatic date & time → Off.
   • Select Date & time → Automatic date & time → Off.
3. To set the date and time manually select Set date and Set time, or Date and Time.