Skip to Content

About this download

Notice of discontinuation of download services for Digital Voice Editor Ver.3.3

Sony supplies Digital Voice Editor Digital Voice Editor Version 3.3.01 which allows you to

  • Save messages recorded in a Sony IC recorder onto your computer hard disk
  • Play those messages back
  • Edit those messages

Prior to downloading this software, please carefully read the following information:

If your model is not listed as compatible model, the connection of your unit to Vista or Win7 will not be supported even after upgrading to Ver.3.3.01

File Name

  • DVESetup_EN.exe

File Size

  • 96.12 Mb

Applicable Models

  • ICD-BP Series
  • ICD-MS Series
  • ICD-P Series
  • ICD-PX Series
  • ICD-S Series
  • ICD-ST Series
  • ICD-MX Series
  • ICD-SX Series
  • ICD-BM Series
  • FS-85USB

Improvements

  • Saving and adding recorded messages:
    You can save messages recorded by an IC recorder onto your computer hard disk by messages or folders.
    You can also add messages saved in the computer hard disk to an IC recorder

  • Editing the recorded messages:
    You can divide a message into two messages or combine up to five messages into one.

  • Converting the file format:
    You can convert the file format of a message saved in the computer and save it as another file.
    You can also convert a message recorded by an IC recorder into an MP3 file.

  • CD burning function (CD Burning Tool for DVE):
    You can add messages from the Digital Voice Editor or Windows Explorer window onto the CD Burning Tool for DVE window, and then burn the data onto a CD-R/RW as an audio CD or data CD.

  • CD recording function (CD Recording Tool for DVE):
    You can convert a CD track into a file format that complies with the Digital Voice Editor and then save the converted file on a computer hard disk.

Modifications

  • The Software "Digital Voice Editor Ver.3.3.01" supports ICD-PX820/PX820M/PX820D/SX750/SX850/SX850D.
  • Readme has been revised to include Windows 7 support.

System Requirements

Your computer and system software must meet the following minimum requirements:

Operating system:

  • Microsoft Windows 7 Ultimate
  • Microsoft Windows 7 Professional
  • Microsoft Windows 7 Home Premium
  • Microsoft Windows 7 Home Basic
  • Microsoft Windows 7 Starter
  • Windows Vista (Service Pack 1 or higher) Ultimate
  • Windows Vista (Service Pack 1 or higher) Business
  • Windows Vista (Service Pack 1 or higher) Home Premium
  • Windows Vista (Service Pack 1 or higher) Home Basic
  • Windows 2000 Professional Service Pack 4 or higher

Preinstalled

Notes:
Operating systems other than the ones indicated above (such as Windows 98 / Windows 98SE / Windows Me/ Mac OS, or Linux) are not supported.

Products support DVE Ver.3.3.01
Applicable OS
Windows 7Windows VistaWindows 2000
32 bit version64 bit version32 bit version64 bit version32 bit version64 bit version
ICD-BP series
ICD-MS seriesICD-MS515 #
Models other than above ### #
ICD-P/PX seriesICD-P620/P630F/P520/P530F
ICD-PX720
Models older than above
ICD-S series
ICD-ST seriesICD-ST25/ST45
Models other than above
ICD-MX series
ICD-SX seriesICD-SX750/SX850/SX950/SX700
/SX800/SX900/SX68/SX78/SX88/SX67/SX77
Models older than above
ICD-BM series # #
FS-85USB

Notes:
Y: Supported
N: Not supported
#: It is supported when a memory stick supplied with ICD-MS/BM series or a recommended one is inserted in a memory stick slot of the PC.

  • Computer: IBM PC/AT or compatible
  • CPU: Windows 2000, 266MHz Pentium II processor or higher
    (For Windows Vista, 800MHz Pentium III processor or higher)
    (For Windows 7, 1GHz Pentium III processor or higher)
  • RAM: Windows 2000, 128MB or more
    (For Windows Vista, 512MB or more)
    (For Windows 7, 1GB (32bit version), 2GB (64bit version) or more.
  • Hard disk space: 300MB or more depending on the size and number of sound files you store.
  • CD-ROM drive (When creating an audio CD or data CD, a CD-R/RW drive is needed)
  • Port: USB port
  • Sound cards compatible with any of the supported Microsoft Windows operating systems
  • Display: High color (16bit) or more and 800x480 dots or more
  • Internet access for Voice Mail function and CD database service

Note:The following systems are not supported.

  • OS other than the ones indicated above
  • Personally constructed PCs or operating systems.
  • Upgraded OS
  • Multi-boot environments
  • Multi-monitor environments
  • Operations on all the computers with the above requirements are not always assured.

Install

Before downloading and installing "Digital Voice Editor 3.3.01", check the following:

  1. If you are using Windows 7/Windows Vista

    To install this software in Windows 7/Windows Vista, please log on using a user name with "Computer Administrators" as an attribute.

    When installing the software in Windows 7/Windows Vista, the User Account Control dialogue box “Do you want to allow the following program to make changes to this computer?” or “A program needs your permission to continue” might be displayed. When you consent to the message, continue the installation.

    Click to check the Windows 7 compatibility of your model:
    BM series
    P series
    SX series

  2. If you are using Windows 2000 Professional

    To install this software in Windows 2000 Professional, please log on as "Administrators"

    For models ICD-P17, ICD-P27, ICD-P28, ICD-P110, ICD-P210, ICD-P320, ICD-P330F, ICD-P520, ICD-P530F, ICD-P620, ICD-P630F:
    (In case you install the software onto any edition of Microsoft Windows 7* or Windows Vista 64-bit, the following “ICD-P series Confirmation” dialog box will not be displayed.)
    * ICD-P17, ICD-P27, ICD-P28, ICD-P110, ICD-P210, ICD-P320, and ICD-P330F are not compatible with Windows 7.

    To save or edit a DVF (TRC) file whose format used in ICD-P series, you need to install Digital Voice Editor while selecting that you use ICD-P series.
    Please checkYesif "ICD-P series Confirmation" dialog box is displayed when installing.
    In case you have installed while selecting that you do not use ICD-P series, please install Digital Voice Editor again while selecting you use ICD-P series.



  3. If a previous version of Digital Voice Editor is already installed

    If you install this software on a computer on which Digital Voice Editor Ver.1.x/2.x/3.0/3.1/3.2/3.3.00 is installed, please note the following points:

    • In case Digital Voice Editor Ver.1.x is installed.
      Please uninstall* Digital Voice Editor Ver.1.x if you do not use messages in ics file format (recorded by ICD-R100/R200).
      You can select whether to uninstall Ver.1.x or not when installing Digital Voice Editor 3.3.01

    • In case Digital Voice Editor Ver.2.x or 3.0 is installed.
      Digital Voice Editor 3.3.01 is installed after the previous version is uninstalled*.

    • In case Digital Voice Editor Ver. 3.1/ 3.2 /3.3.00 is installed.
      Overwrite installation of the software will begin.
      * Important note: Please uninstall the previous version according to the procedure displayed when installing Digital Voice Editor 3.3.01. The message saved in the computer and/or the option setting may not be taken over normally if you uninstall it from the uninstall function attached to the previous version.

  4. If you have no backup of your recorded messages

    If your recorded messages are saved on your computer, we recommend that you backup the messages onto a CD-R/RW disk or an external memory in case of installation failure.

Download Procedures

Please follow the steps below to download the file.

  1. Create the following folder for storing the downloaded file on your hard disk:C Drive : SonyTemp
  2. DownloadDVESetup_EN.exe(96,121 KB) into the folder created at Step 1, by clickingDownloadat the bottom of this page to start download. Follow the instructions displayed in the dialog box.
  3. After the download is completed, selectViews-Detailsin the Explorer to check the file size. If the file size is not the same as the file size showing above, try to download the file again.

Install Procedures

If the download is completed, please follow the steps below to install the software on Windows.

  1. Close all currently running programs on your computer.
  2. ClickStarton the task tray and clickRun*. Then the dialog boxRunwill appear.
    *In case of Windows 7/Windows Vista, clickAll Programs-Accessories-Runto open theRundialog box.
  3. In the "Run" dialog box, typeC:\SonyTemp\ DVESetup_EN.exeand clickOKto start the installation.
    (In this case, the program fileDVESetup_EN.exewas downloaded into the folderC:\SonyTemp\ DVESetup_EN.exe)
  4. Follow the on-screen instructions to complete the installation.
  5. The installation is completed when the message "InstallShield Wizard has successfully installed Digital Voice Editor 3." is displayed. Click "Finish" and restart the computer.
  6. Check that the installation completed successfully: Start Digital Voice Editor, and selectAbout Digital Voice Editorfrom theHelpmenu.
  7. Confirm that the version displayed isVer.3.3.01.11240

All other trademarks are trademarks of their respective owners. In this page, ® and (TM) marks are not specified.

Notes

Please read carefully the following notices. Sony will not take any responsibilities in case of damages of sets occurred by not following the below notices.

  • Please follow the procedure, and when downloaded, please make proper use of this program.
  • Environments that are upgrades of the original manufacturer are not supported.
  • You can change to system standby/hibernate mode at your own discretion on the Windows 7/Windows Vista specification, but do not let your computer change to system standby/hibernate mode while running Digital Voice Editor.
  • When using this program, we have no responsibility for the direct or indirect loss accomplished, or related and produced damages, etc.
  • This program has copyright protection. The user may not transfer and copy this program, and not grant to use it within the given use by Sony

Notice of discontinuation of download services for Digital Voice Editor Ver.3.3