Article ID : 00161789 / Last Modified : 24/03/2019

How to use Screen mirroring

Applicable Products and Categories of This Article

The TV can be connected directly with a Screen mirroring and Miracast compatible device without the use of a cable or wireless router (or access point).

A connection must be made by selecting mirroring on the TV and on the source device.

Refer to the list of Wi-Fi Certified Miracast devices found on the Wi-Fi Alliance website for more details.


To register your device to the TV

Follow the instructions below to set it up.

NOTE: The operation menu varies depending on the model. The instructions below use the W900A series as an example.

  1. Press the INPUT button on the TV remote, select Screen mirroring using the Image / Image buttons, then press the Enter button. * The TV goes into standby and waits for a connection from a mobile device.


    NOTE: When the standby screen of the Screen mirroring is displayed, the wireless connection between the TV and your wireless router (access point) is disconnected.

  2. Connect your Screen-mirroring-compatible mobile device to the TV. Configure your mobile device to connect to the TV.

The instructions below use Xperia (Android OS 4.4 or later) as an example.

  1. Tap Settings.
  2. Select Device connection or Xperia Connectivity.
  3. Select Screen mirroring.
  4. On the Screen mirroring screen, tap Start.
  5. Select OK.
  6. Tap the name of your TV.

You can check the detailed instructions in the following movie.

To list connected devices/deregister devices

When the standby screen for the Screen mirroring is displayed, press the OPTIONS button, then select Show Device List / Delete.

To deregister a device, select the device in the list to delete, then press the Image button. Then, select Yes in the confirmation display.

To deregister all devices, press the OPTIONS button in the list, select Delete All, then Yes in the confirmation display.

Icons on the left of the list show the following.

Image (check icon): Connected devices

Image (display icon): Screen mirroring compatible devices

To display dialog when attempting to connect a device with the TV

Activating this function can avoid an unintended device from being connected.

When the standby screen for the Screen mirroring is displayed, press the OPTIONS button, then select Registration NotificationOn.

Note that once you decline registration request from a device, you will not be able to connect the device unless you delete it from the device list

To connect the declined device, press the OPTIONS button, select Show Device List / Delete, then delete the declined device. Then, make a new connection with the device.

Connecting devices must conform to the following:
  • Screen mirroring compatible devices: 2.4GHz connection (5GHz not supported).
  • Miracast compatible devices: 2.4GHz connection (5GHz not supported).