Tablet S: If the tablet does not start and/or turn off, keep the reset hole pressed for 3-4 seconds (make sure sure the LED will blink 2-3 times before releasing the reset hole). Do it with a bent-open paper clip. Note: Don't use a needle, pin or pen to avoid damage to the reset button.
Tablet P: to reset the Tablet P, disconnect from the power supply, remove the battery, then reinsert the battery again and turn it on.
- Press the two buttons to open the bottom cover
- Remove the battery pack and reinsert it again after having replaced the bottom cover. Connect the Tablet to the power supply.