Article ID : 00204030 / Last Modified : 25/10/2019

XAV Steering Wheel Control compatibility

    General Notes

    • Compatibility is only confirmed with the Japanese Car Manufacturing companies listed below 
    • Sony recommends using a professional for installation.
    • Car manufacturers can change the wiring specifications without notice. Be sure to locate the correct wires before beginning installation.
    • Please refer to the operating instructions or contact the manufacturer of your car or car dealer for more information.
    • All connections shown in this chart are from the wire side, not the terminal side.
    • It is recommended that all car stereo installations be performed by a qualified, professional installer.
    • Be sure to connect each lead properly to avoid damage.
    • Cover any unused leads with electrical tape for safety.
    • Do not connect the cable if you are not using the steering wheel control feature.
    • This information is subject to change without notice.
     

    XAV Supplied Cable

    XAV-65 supplied cable

    Car Wiring Configurations

    ManufacturerConnector TypePin AssignmentNotes
    Toyota20Ptoyota 20 pinInput 1:1
    Input 2:2
    GND = G
     
    26Ptoyota 26 pinInput 1:1
    Input 2:2
    GND = G
     
    28Ptoyota 28 pinInput 1:1
    Input 2:2
    GND = G
     
    Honda20P-Ahonda 20 pin configuration aInput 1:1
    Input 2: N/C
    GND = G
     
    20P-Bhonda 20 pin configuration bInput 1:1
    Input 2: N/C
    GND = G
     
    24Phonda 24 pinInput 1:1
    Input 2: N/C
    GND = G
     
    Nissan16P-Anissan 16 pin configuration aInput 1:1
    Input 2:2
    GND = G
     
    16P-Bnissan 16 pin configuration bInput 1:1
    Input 2:2
    GND = G
     
    20Pnissan 20 pinInput 1:1
    Input 2:2
    GND = G
     
    Mitsubishi20Pmitsubishi 20 pinInput 1:1
    Input 2: N/C
    GND = G
     
    Mazda24Pmazda 24 pinInput 1:1
    Input 2: N/C
    GND = G
     
    Subaru8PSubaru 8 pinInput 1:1
    Input 2: N/C
    GND = G
     
    20PSubaru 20 pinInput 1:1
    Input 2: N/C
    GND = G
     
    Maruti Suzuki20PSuzuki 20 pinInput 1:1
    Input 2: N/C
    GND = G