WAIT - Read the Required Files section before downloading this file.

Required Downloads

Unless stated otherwise, the file listed below must be installed BEFORE the Firmware update to v8.764 in order for it to work properly. If more than one Required file is listed, install them in the order presented on this page.

This information is for the following models:

  • KD-65XE7005
  • KD-55XE7005
  • KD-49XE7005
  • KD-43XE7005
  • KD-55XE7003
  • KD-49XE7003
  • KD-43XE7003
  • KD-55XE7000
  • KD-49XE7000
  • KD-43XE7000
  • KD-55XE7077
  • KD-49XE7077
  • KD-43XE7077
  • KD-65XE7096
  • KD-55XE7096
  • KD-49XE7096
  • KD-43XE7096
  • KD-65XE7004
  • KD-55XE7004
  • KD-49XE7004
  • KD-43XE7004
  • KD-65XE7003
  • KD-55XE7073
  • KD-49XE7073
  • KD-43XE7073
  • KD-65XE7093
  • KD-55XE7093
  • KD-49XE7093
  • KD-43XE7093
  • KD-65XE7002
  • KD-55XE7002
  • KD-49XE7002
  • KD-43XE7002

About this download

Benefits and improvements from the latest update

  • The 360 Video feature is now available in the YouTube app
  • Hybrid broadcast broadband TV (HbbTV) is now supported in the UK. To configure this feature, please go to Home > Settings > System Settings > Channel Set-up > Digital Setup > Interactive Application Setup
  • Samba TV is now available* as an optional feature. For more information, please visithttps://samba.tv/
    *Supported countries: UK, Poland, The Netherlands, Germany, France, Italy and Spain

Previous benefits and improvements

The following benefits and improvements are also included in this update.

  • Resolves intermittent sound issues with the cable operator, Dom.ru (Russia, Kazakhstan and Ukraine only)
  • Resolves an issue where, under certain circumstances, the TV restarts when pressing the [HOME] button and then the [RETURN] button on the remote control
  • Improves the Home screen user interface (Russia, Kazakhstan and Ukraine only)
  • Improves browser scrolling functionality while using the CH+/- buttons on the remote control
  • Supports USB keyboard and QWERTY keyboard functionality
  • Supports Dolby AC-4 Audio Dialog Enhancer
  • Adds built-in Help Guide/Legal Information to the TV Customer Support menu
  • Resolves an issue where the TV is unable to connect to Internet services (Error 2200)
  • Resolves an issue where lip sync errors occur on streaming apps when the TV is connected to an external audio device
  • Resolves an issue where YouTube is unable to start/resume playback and gets stuck on the loading screen
  • Resolves an issue where the TV cannot connect to the Internet via Wi-Fi
  • Resolves an issue where the USB port is not working
  • Resolves an issue where apps are not working or apps are not displayed on the TV
  • Resolves an issue where the TV cannot play videos in the Amazon Video app and displays the following message: “Insufficient bandwidth”
  • Resolves an issue where the TV will turn back on after it is turned off via the Amazon Video app
  • Introduces Freeview Play EPG (UK only)
  • Improves input lag in “Game Mode” after the TV is turned on from standby mode
  • Resolves an issue where the TV cannot connect to the Wi-Fi access point from standby mode
  • Resolves an issue (for Kabel Deutschland customers) where the TV and radio services are mixed in the EPG after turning the TV off and on (Germany only)
  • Resolves an issue where the TV continuously reboots when on PMC satellite channel
  • Resolves Netflix playback issues after watching the All4 app
  • Resolves lip syncing issues when watching cable TV
  • Resolves an issue where a horizontal line appears when viewing USB Media 4K content
  • Resolves an issue where the TV was unable to display photos when transferring photos from Sony ILCE-6300 camera via Wi-Fi Direct
  • Resolves an issue where the Privacy Policy message appears when launching Internet services
  • Resolves an issue where YouTube videos do not load
  • Resolves an issue where the remote control stops working after turning the Wi-Fi function off/on
  • Resolves an issue where the TV freezes after connecting a USB device that uses the Media Transfer Protocol (MTP)
  • Resolves an issue where the YouTube interface language does not match the language selected on the TV
  • Improves the performance and stability of the Action Menu features
  • Improves the general performance of the TV
  • Fixes an issue where the colour was inaccurately displayed for 4K images after changing channels
  • Improves performance and stability of overall UI operation


  • Only for use with the products sold in Europe. Not all models are sold in all countries.


Check the software version

Your software may already be up to date. If you're not sure, it's easy to check which version of software you have - follow these instructions:

  1. Turn on your TV and press the [HOME] button on the remote to display the Home Menu.
  2. Navigate to [Settings], and press [Enter].
  3. Navigate to [Customer Support] and press [Enter].
  4. The model and software version should be displayed on the top right-hand corner of the screen: "v8.764".
    - If the version number is lower than "v8.533", please install version "v8.535" from the Download section on your model page before you install version "v8.764".
    - If the version number is either "v8.533" or "v8.535", please update directly to "v8.764".
    - If the version number is "v8.764" or higher, you already have the most recent firmware.

There are 2 ways to update the firmware on your BRAVIA TV:

  • Using the "Automatic Software download" function (recommended)
  • Using a USB storage device
Using the "Automatic Software download" function (recommended):
Sony provides software updates in order to enhance functionalities and provide users with the latest TV experience.The easiest way to receive software updates is by downloading directly from your TV via the Internet.
NOTE: Make sure that the "Automatic Software download" function is enabled. (By default, this setting is enabled.)

  1. Press the [HOME] button on the remote.
  2. Select [Settings], and press [Enter].
  3. Select [Customer Support] and press [Enter].
  4. Select [Automatic Software download].
  5. Select [On] to download the software automatically. Select [Off] to disable it.

IMPORTANT: The following "System Requirements," "File Info," "Download" and "Install," sections relate to the USB storage device update procedure.You can ignore them if you completed the update using the “Automatic Software download” feature.

For other FAQs about Troubleshooting, please see the "Questions and Answers" on the Sony Support Site.

Using a USB storage device:

You can also update the software by using a USB storage device.If you are not connected to the Internet, or the "Automatic Software download" function fails to download, try to download and update using a USB storage device as instructed below.

System Requirements

What You Need

  • a computer with access to the Internet
  • a USB storage device

File Info

File Name

  • Firmware update to v8.764 for TV

Zip File Name

  • sony_tvupdate_2017_8764_eff_auth.zip

File Version

  • 8.764

File Size

  • 267 608 011 bytes

Release Date

  • 21-11-2018


Important Notice

  • Read the instructions carefully or you could end up causing the TV to become unresponsive or require a repair.
  • Do not turn the TV off - or disconnect it from the power - while it's updating.
  • Do not press any buttons, except the ones mentioned in the instructions.
  • Stop any recording before you start with the firmware update. (USB HDD recording models only)

How to download the Updater

Before you install the update, you'll need to download it from the Internet and save it to a USB storage device.

  1. Download the update file to your PC.
    1. Click the [Download] button on the top of this page, then read and accept the terms and conditions.
    2. Click the [Download] button on the bottom of the page to download the update file on your PC.
  2. Verify the downloaded file name and size.
    1. Go to the directory where the file was downloaded.
    2. Verify that the size of the "sony_tvupdate_2017_8764_eff_auth.zip" file is "267 608 011" bytes.
      NOTE: For Windows PC, verify the "Size" instead of "Size on disk" on the Properties screen.
  3. Extract the downloaded file.
    After you extracted the downloaded file, you will find the folder "sony_dtv02B40B09B4BD_00200100".
  4. Insert the USB storage device into your PC.
  5. Copy or drag and drop the folder "sony_dtv02B40B09B4BD_00200100" to the root directory of your USB device.
    NOTE: "The root directory" is the first or top-most directory of the device, which contains all the other folders.
  6. Remove the USB storage device from your computer and continue to the next section.


Step 1: Install the update

Once you've downloaded the update file and prepared your USB device, you can install it on your TV.The process can take up to 15-30 minutes and during the installation your TV will turn off before turning itself back on. Please follow the simple steps below:

  1. Turn on the TV.
  2. Make sure that no USB devices are inserted into your TV.
  3. Insert your USB storage device containing the folder "sony_dtv02B40B09B4BD_00200100" into a USB port of the TV set.
    NOTE: Any USB port can be used if the TV has multiple USB ports.
  4. Press [HOME] on the remote to open the HOME menu.
  5. Navigate to the [Settings] category and press [Enter] to select it.
  6. Navigate to and select [Customer Support].
  7. Navigate to and select [Software Update], then select [USB].
  8. A series of different messages will appear on the TV screen - follow the on-screen instructions.
  9. The update will start and an orange Led light will start blinking on the front panel of the TV.
    WARNING: During the software installation process, please do not:
    • Remove the USB device
    • Turn off the TV
    • Disconnect the TV from the power supply
  10. When the "Firmware update complete" message is displayed on the TV set, the TV will turn off and then turn back on to complete the update. - Do not remove the USB device or turn off the TV set.
  11. After the TV turn back on, remove your USB storage device from the USB port.

Step 2: Check the update was successful

Check the current software version to confirm that the update has successfully been installed.

  • If the version number is "v8.764" or higher, the software update was successful.
  • If the version number isn't "v8.764" or higher, download and install the update again.

Questions & Answers

Possible Issue During the Update

Need more information? See our FAQs about updating the software over the Internet:

  • Will my personal settings be deleted after the update?
    No, all your personal settings will be kept.

  • Can I install an older version of the software?
    No. To ensure that your TV remains at optimum performance, the installation of an older software version is not possible: the latest software version contains all the benefits and improvements of previous versions.

  • Is it normal for the TV to turn off during the update process?
    It is normal for the TV to restart during the update process. It will take a longer time for the TV to restart while installing the new software.

What to do if you have problems updating your TV firmware using the Internet

If either message "An error occurred during the software update" or "Software cannot be updated using this USB device" is displayed on the TV screen, please proceed to the following procedures for a possible solution:

  1. Make sure your USB storage device is in good working order. If it is, try downloading the update file again.
  2. Turn off the TV by pressing the [POWER] button on the TV set.
  3. Press the [POWER] button again, and proceed with the installation process again.

If the message "No newer version of the TV software was found" is displayed on the TV front panel display, your TV already has newest software version installed, so you do not need to update it.

For other FAQs about Troubleshooting, please see the "Questions and Answers" on the Sony Support Site.