Article ID : S700023666 / Last Modified : 12/07/2018Print

How to connect to Mobile Broadband via Oneclick Internet (Windows 7)

    difficulty rating Difficulty rating:
    time needed Time needed:
    10-15 minutes activity

    This article provides specific instructions for the WebToGo OneClick Internet connection manager for Windows 7 and is applicable only to units equipped with a 3G/LTE Module.

    General info on connecting wirelessly to the Internet via WWAN can be found here.

    1. Start OneClick Internet (click Start > All Programs > OneClick Internet).

    2. Enter your SIM card s PIN code if prompted and click OK.

    3. Wait until the program has detected your network.

    4. Click the Connect button to start the connection.
    5. You are now connected. If you wish to browse the Internet, you can start your internet browser.

    6. To end up your WWAN connection, click the Disconnect button in OneClick Internet.

    Note: If you are unable to connect, click the Settings button in OneClick Internet. On the Profile tab, verify that the correct settings are configured for your network. Contact your mobile operator for information. For help about OneClick Internet, click the Help button within this program.