Skip to Content

Applicable Models

This information is for the following models:
  • ILCE-7RM2

About this download

  • Name:System software Ver.3.30 for ILCE-7RM2 (Windows)
  • Release date:17/08/2016
  • Benefits and improvements:
    • Support for Radio-controlled Lighting System
    • Improves stability of the camera while shooting still images by regulating the internal temperature
    • Overall stability and operability of the camera is improved.

Confirm the system software version of your camera

Follow the instructions below to check the system software version of your camera.
If the system software version is Ver.3.30 or later, the update is not required.

  1. SelectMenu-->Setup subpage 6-->Versionon the camera.
  2. The system software version is displayed as illustrated below.

System Requirements

Operating Systems

The latest version of the system software update iscompatible with most commonly used versions of Microsoft Windows:
  • Windows® 10
  • Windows® 8.1
  • Windows® 7 SP1
  • Windows® Vista* SP2
    *Starter edition is not supported.

Computer hardware

The latest version of the system software update iscompatible with the following hardware:
  • Hard disk space: 300MB or more
  • RAM: 512MB or more
    Note:Please close all other application software before updating the system software.
  • Power source for the camera
    • Fully charged rechargeable battery pack NP-FW50 or AC adapter AC-PW20 (sold separately)

      Note: The update can be performed only when the remaining battery level is (three marks) or more. We recommend that you use a fully charged battery or the AC adapter AC-PW20 (sold separately).
      Detach the vertical grip before updating system software.
  • USB cable supplied with the camera

    Note: Update functionality is not guaranteed with any other USB cable.


  • When performing the system software update,please use a fully charged rechargeable battery pack NP-FW50 or the AC adapter AC-PW20 (sold separately).
  • Do not remove the battery or AC adapter during the update;otherwise, the camera may become inoperable due to the sudden power shutdown.
  • Remove the memory cardfrom the camera beforehand.
  • Prevent your computer from sleeping beforehand.
  • Do not be connected to other apparatuses except your computer.

Download the update file

  1. Make sure that you are logged on as a user with administrative rights.
  2. After reading the disclaimer, click the[Download]button below.
  3. The download of the [Update_ILCE7RM2V330.exe] file will start.
  4. Save the file on your computer.

  5. Note for Windows 8.1 / 10 users:

    Under the initial settings of Internet Explorer, the update file will be saved in the [Downloads] folder. Click the [Desktop] tile from the Start screen and find the downloaded file in the [Downloads] folder by using Explorer.


  1. Start up System Software Updater
    1. Close all currently running programs on your computer.
    2. Double-click the downloaded file [Update_ILCE7RM2V330.exe].
    3. System Software Updater starts up.

  2. Check the USB connection mode

    According to the instruction on the System Software Updater window, selectMenu-->Setup subpage 4-->USB Connectionon the camera, and check ifMass Storageis selected.
    If another mode thanMass Storageis selected, please selectMass Storage.

  3. Connect the camera to the computer
    Remove the memory card from the camera beforehand.

    Connect the camera to the computer with the supplied USB cable. "USB Mode" appears on the LCD screen of the camera.

    If the computer cannot find the camera, the message "Could not find the camera for this update." appears on the computer display. Try the following if this happens.
    • Disconnect the USB cable and connect it again.
    • If the computer has multiple USB terminals, try with the other terminals.
    Sometimes when the camera is connected to the computer with the USB cable, the message to encourage rebooting the computer may appear on the computer display. In this case, remove the battery pack or AC adaptor from the camera, reboot the computer, and follow the procedures from"2. Start up System Software Updater".
  4. Check if the update is required
    1. After confirming the LCD monitor of the camera, click [Next]. The current version and the version after the update appear on the lower left part of the screen.

      Update is required

      Update is not required

      Note:If Current version is Ver.3.30, the update is not required. According to the message, stop the USB connection and click Finish. Turn off the camera, remove the battery pack or the AC adaptor, and then turn on the camera again.
    2. After confirming [Current version] is "Ver.3.20 or earlier", click [Next].
  5. The camera automatically reset.

    The following screen appears.
  6. Start the update
    After automatically resetting, the following screen appears and the update starts. The progress bar appears while updating (approximately 15 minutes).
    Note:Never turn off the camera nor disconnect the USB cable while updating.

  7. Complete the update

    When the update is completed, the camera will automatically restart. Make sure the camera is turned on and wait until the LCD screen appears again. ClickFinishwhen the LCD screen apears and disconnect the USB cable.

    After restarting, recovering data caution is rarely displayed. There are no abnormalities. Please wait until this caution goes out.

  8. Confirm the system software version of your camera is Ver 3.30.

  9. Check the system software version

    Follow the instruction below to confirm the software version is Ver.3.30.

    SelectMenu-->Setup-->[6]-->Versionon the camera.
    The software version is displayed.

I have read the disclaimer and agree to the terms and conditions