Skip to Content

Applicable Models

This information is for the following models:
  • DPF-W700

About this download

  • Name:Firmware update Ver.1.40 for DPF-W700
  • Release date:29/09/2016
  • Benefits and improvements
    • Update needed to continue using the photo frame in accordance with Facebook' specification changes
  • Identify whether your digital photo frame needs an update

    Please check the version of the system software, following the procedure listed below. If the system software version is already [Ver.1.40], you will not need the update.

    1. Press MENU on the rear of the photo frame. The menu appears

    2. Tap [Settings]. The Settings menu appears

    3. Drag with your finger to scroll through the list and tap to select [System Information].

      System Information appears
    4. Check [Version].


      If the version displayed is 1.39 or lower, update the firmware

System Requirements

Operating Systems

The latest version of the firmware update iscompatible with most commonly used versions of Macintosh:
  • Mac OS X 10.4 or later

Recording media

One of the following types of recording media (Memory capacity between 128 MB and 32 GB):
  • "Memory Stick Duo"
  • SD memory card
  • USB flash drive
    Note:For details on compatible recording media, see "Compatible Memory Card/USB flash drive" in the Digital Photo Frame Handbook.

Download

  1. Make sure no program other than your Internet browser is running
  2. You must accept the terms of the End User License Agreement at the bottom of this page. After reading this agreement, click'Agree'
  3. The download of theSML70V09.zipfile will start
  4. Save the file to the Desktop of your computer (recommended)

Install

1. Unzip the downloaded file

  1. Double-click the saved file (SML70V09.zip)
  2. TheSML70V09folder is created on your desktop
  3. The unzippedSML70V09folder contains the following update file:SML70V09.DUP.
    Depending on your operating environment, some file extensions (.DUO/.dup) may not be displayed

2. Copy the update files to the recording media

The following section describes how to update using a "Memory Stick Duo". If you are using an SD memory card or USB flash drive, please replace "Memory Stick Duo" with the recording media device you're using in the following explanation.

Copy the update files to the "Memory Stick Duo" using one of the following methods:

If you computer is equipped with a Memory Stick slot:

  1. Insert the initialized (formatted) "Memory Stick Duo" into the Memory Stick slot on your computer
  2. Open theSML70V09folder on your desktop, and copy the update fileSML70V09.DUPinside it to the "Memory Stick Duo"
  3. Drag and drop the update file to the root of the "Memory Stick Duo", without creating any new folder for it

If you computer has no Memory Stick slot:

  1. Insert the initialized (formatted) "Memory Stick Duo" into the Memory Stick slot on your digital camera
  2. Connect your digital camera to your computer using a USB cable
  3. Open theSML70V09folder on your desktop, and copy the update fileSML70V09.DUPinside it to the "Memory Stick Duo" that you have inserted into your digital camera
  4. Drag and drop the update file to the root of the "Memory Stick Duo", without creating any new folder for it

3. Update the firmware

Note:During the update, ensure that the digital photo frame and the AC adaptor are placed on a stable location, so that the AC adaptor may not be removed and the digital photo frame is not turned off. Loss of power during the update may cause the digital photo frame to malfunction.

  1. Plug the AC adapter attached to the set into the DC IN terminal on the rear of the digital photo frame and insert the power cord into the socket. The photo frame will automatically turn on
  2. Insert the "Memory Stick Duo" containing the copied update file into the slot on the digital photo frame
  3. Press MENU on the rear of the digital photo frame. The menu appears
  4. Tap [Settings]. The Settings menu appears

  5. Drag with your finger to scroll through the list and tap to select [System Information].

    System Information appears
  6. System Information appears. Tap [Update Firmware]

  7. Tap [Download]. The download of the update starts on the internal memory of the digital photo frame.
    Note:The text displayed on the digital photo frame differs depending on the firmware version

  8. When the dowload of the update is completed, tap [Restart to update]

  9. The update will automatically start after the restart of the digital photo frame
  10. Remove the "Memory Stick Duo" from the digital photo frame

4. Check the firmware version of the updated device

To check the firmware version after the update, follow the steps as described inIdentify whether your digital photo frame needs an update.
If the version displayed is 1.40, the firmware update was performed correctly. If another or no version number is displayed, the firmware update was not performed correctly. Perform the firmware update again from the beginning.

I have read the disclaimer and agree to the terms and conditions