Skip to Content

About this download

About this upgrade (26/05/2011)

This file updates your TV set firmware to version SYASOW.F16M.R128M.V04.T02, and provides the following benefits:

Improvements in this version

  • Improve general performance and stability

Applicable models

  • KDL-19BX200
  • KDL-22BX200
  • KDL-22BX20D

Warning

  • Please follow the update instructions carefully. Failure to follow the instructions may interrupt the update process and may cause the TV set to be unresponsive or to require repair.
  • Do not power off the TV or disconnect it from the AC power outlet. Loss of power during the installation of the firmware update may cause the TV set to be unresponsive or to require repair.
  • Make sure you are about to download a TV firmware update which is suitable for your TV set by checking the country indication on the top of this page. TV firmware may be different for each country.

Common questions

  • How can I check my TV firmware version?
    1. Power on the TV set and press theMENUbutton on the Remote Commander to display the Home Menu.
    2. Navigate to the 'Settings' option and press OK to select it.
    3. Navigate to the 'Options' option and press OK to select it.
    4. Navigate to the 'Product Support' option and press OK to select it
    5. The version number is shown on the bottom line
  • Will my personal settings be deleted after the update?
    • All user settings will be kept.
  • During the update process, the TV turns off?
    • It is normal for the TV set to restart during the update process. You may experience the TV set taking a longer than normal time for it to restart as it is installing the new firmware.

Install

  1. You need to accept the disclaimer below before downloading the file.

  2. After you have accepted the disclaimer, save the update file to your computer Desktop.

    When the update download is complete, check that the file size is 7,693,312 bytes.
    To do so, right click the file, select "properties" and check that the "General" tab displays the following size information:


    If the size information displayed on your computer is different, delete the downloaded file, clear your internet browser's cache and download it again.

  3. Open Windows explorer, locate the downloaded file 'AP.bin' and copy the file to the root of your USB device

  4. Important notes:
    • Make sure that there is enough space on your USB device.

Firmware update procedure

The firmware update process may take up to 5 minutes. First read the whole procedure before starting to update the firmware of your TV set.

  1. Turn on the TV set

  2. Insert your USB device containing 'AP.bin' into the USB slot of the TV set.

  3. PressMENUon the Remote Commander and ensure the TV Home Menu is displayed

  4. Using your Remote Commander, navigate to ‘Settings’ and press OK. Then navigate to ´Options’ and press OK and navigate to ´USB Software Update’ and press OK

  5. When the firmware update is completed, the following message is displayed on the TV set: “Please remove USB device and wait for rebooting”.

  6. Remove your USB device from the USB slot and wait for a few seconds until the STANDBY indicator turns red.

  7. Disconnect the TV set from the AC power outlet, wait for at least five seconds and then reconnect the TV set again.

  8. To check the TV firmware version:
    • Power on the TV set and press theMENUbutton on the Remote Commander to display the Home Menu.
    • Navigate to the 'Settings' option and press OK to select it
    • Navigate to the 'Options' option and press OK to select it.
    • Navigate to the 'Product Support' option and press OK to select it.
    • The version number is shown on the bottom line.
    • Confirm the version number.
    • If the version number shown on the first line is SYASOW.F16M.R128M.V04.T02, your TV set has been correctly updated.

The firmware update has failed.

Please proceed with the following procedure:

  1. Verify your USB device is in good working order and follow the download process again.
  2. Turn off the TV by pressing the POWER button on the TV set.
  3. Press the POWER button again, and proceed with the installation process again.

File Info

File Name

  • AP.bin

File Size

  • 7.34 Mb
I have read the disclaimer and agree to the terms and conditions