Article ID : 00138580 / Last Modified : 13/04/2022

The Self-diagnosis display (error code), such as E:62:11 and E:62:12, appears

    IMPORTANT: This article applies only to specific products and/or operating systems. Check Applicable Products and Categories for details.

    These error codes appear when the Self-diagnosis function works. Your camcorder is equipped with Balanced Optical SteadyShot, and if excessive force is applied to the lens while the power is on, the protection of the lens driving circuit may be activated and the error code may be displayed.

    In this case, remove and insert the battery to cancel the error code. When cleaning the lens, use a soft cloth to wipe the lens and be careful not to apply force to it.