Applicable Model

This information is for the following models:

  • BVM-E170
  • BVM-E170A
  • BVM-E171
  • BVM-E250
  • BVM-E250A
  • BVM-E251
  • BVM-F170
  • BVM-F170A
  • BVM-F250
  • BVM-F250A
  • BVM-HX310
  • BVM-HX3110

[Purpose of this software]
Monitor_AutoWhiteAdjustment is a PC software application for measuring and adjusting the color temperature and luminance of a monitor. It can be used with eleven of the most popular color analyzer probes available on the market. Refer to the User Guide, Release Note and ReadMe files for further information.

[New features]
The following monitors are now supported.
BVM-HX3110 and LMD-A180
The firmware update of them is separately provided in the support page of them.

[Preparation and how to calibrate]

  • You need to prepare an Windows PC, a switching hub, ethernet cables and each firmware of the applicable models.
    For more details, please read "Release_Notes_for_Monitor_AutoWhiteAdjustment_V1_8_GB" and "Monitor_AutoWhiteAdjustment_User_Guide_V1_8_GB".

[Supported probes]
i1Pro, i1Pro2 manufactured by X-Rite
CA-310, and CA-410 manufactured by Konica Minolta
PR-655, PR670 manufactured by Photo Research
K10-A manufactured by Klein Optical Instruments
Specbos 1211, spectraval 1501, and spectraval 1511 manufactured by JETI
CR-250 manufactured by Colorimetry Research

Note: It is necessary to install the specified driver or software related to the probe.

[Compatibility information]
This software is compatible with the following Sony professional monitors.

BVM series
BVM-HX3110, BVM-HX310*1, BVM-X300*1, BVM-E251, BVM-E250, BVM-E250A, BVM-E171, BVM-E170, BVM-E170A, BVM-F250, BVM-F250A, BVM-F170, BVM-F170A

PVM series
PVM-X550*2, PVM-X3200*3, PVM-X2400*3, PVM-X1800*3, PVM-A250*1, PVM-A170*1, PVM-2541, PVM-2541A, PVM-1741, PVM-1741A, PVM-741, PVM-740

LMD series
LMD-A240*1, LMD-A220*1, LMD-A170*1, LMD-941W, LMD-A180

*1 software version 1.1 or later
*2 software version 2.0 or later
*3 software version 3.0 or later

V1.8 and earlier versions cannot be installed on a single PC.  When you replace V1.4 or earlier to V1.8, you need to uninstall the existing software first. Existing version cannot be uninstalled automatically in the process of installing V1.8.

[Computer environment]
A computer with the following specification is needed.

Supported OS:
Windows 10 Pro (64-bit version, Version21H2 or later)

Intel Celeron 1 GHz or higher

2 GB or more

1,024 × 768 or more (High Color 16 bit or more)

USB port:
USB 2.0 or higher

Hard disk:
100 MB free space or more

Internet connection

.NET Framework 4.8.1 (Available from the Microsoft website)

The above computer environment does not guarantee correct operation on all computers or operating systems.