Support for DCR-HC37E

Sony Image Data Suite for Windows

• About this download
• How to update ?

About this download

Sony is offering DSLR-A100/A200/A300/A350/A700 users the latest version of α application software, "Sony Image Data Suite" which includes the following software:

• Image Data Converter SR Ver.3.0
  Software to view, adjust and save the RAW format still images shot with your camera.
• Image Data Lightbox SR Ver.2.0
  Software to view, compare, and rate the RAW/JPEG format still images shot with your camera.
• Remote Camera Control Ver.2.0*
  Software to control your camera connected to the computer via USB to shoot images or change the settings.

* This software can be used with DSLR-A700 only.

New Functions and Improvements

• Image Data Converter SR Ver.3.0
  • Improvement of operability
  • Higher speed of display
  • Addition of the peripheral illumination compensation function
  • Addition/Improvement of the D-range optimizer, etc.

• Image Data Lightbox SR Ver.2.0
  • Higher speed of display
  • Enhanced filtering function

• Remote Camera Control Ver.2.0
  • Addition of the "interval timer shooting function"* (for Windows only)

* You can use this function with DSLR-A700 with the firmware updated to Ver.4 from here .

* To activate this function, you need to execute "Interval Shooting Set-up Tool" which is provided here .

Applicable Products

Digital SLR camera "α" series:

• DSLR-A100
• DSLR-A200
• DSLR-A300
• DSLR-A350
• DSLR-A700

Supported Operating Systems

• Windows XP SP3*
• Windows Vista SP1*
• Windows 7 32/64-Bit*

* 64-bit editions of Windows XP and Starter editions of Windows Vista / Windows 7 are not supported.

How to update ?

Download

1. Make sure no program other than your Internet browser is running.
2. You must accept the terms of the End User Licence Agreement at the bottom of the page. After reading this agreement, click "Accept".
3. The download of the IDS30_Installer0809a.exe 34.0 MB (35,716,152 bytes) file will start.
4. Save the file to the Desktop of your computer (recommended).

Installation

1. Double-click the downloaded IDS30_Installer0809a.exe file.
2. The extraction of the file will start. This process may take several minutes.
3. After the file is extracted, the installation of the software will start.*
   
   * If the installation does not start automatically, open the extracted [IDS30_Installer0809a] folder and double-click the [setup.exe] file to start the installation.
   
4. Folow the instruction on the screen to complete the installation.

Note: If the older version of the software is already installed in your computer:

• The older version of Image Data Converter SR will remain, and the new version will be additionally installed.
• Image Data Lightbox and Remote Camera Control will be installed over the older version.