15.3-inch*, 15:9 aspect ratio, WXGA (1280 x 768 pixels) LCD panel.
*15.3 inch viewable area measured diagonally
The LMD-1530W comes equipped with a full range of analogue SD inputs such as composite NTSC and PAL, Y/C (S-Video), and 525i/625i component and RGB. In addition, the LMD-1530W handles SD-SDI input by using the optional BKM-320D SD-SDI input adaptor. The LMD-1530W can accept HD signal via HDMI and analogue component interface, and DVI signals via HDMI interface*.
*A DVI conversion cable is required.
With the BKM-341HS optional adaptor, the LMD-1530W supports both HD-SDI and SD-SDI input, with a higher picture quality and shorter depth compared to the BKM-320D SD-SDI input adaptor.
The LMD-1530W comes equipped with high-purity RGB colour filters, allowing the reproduction of colours with stunning depth and saturation.
The LMD-1530W provides high-brightness, high-contrast images thanks to their wide aperture LCD panels. In addition, the use of precisely manufactured RGB colour filters allows the LMD-1530W to reproduce colours with stunning depth and saturation - creating highly natural images.
The LCD panel used in the LMD-1530W provides a wide viewing angle of 176 degrees, both horizontally and vertically, with minimal reduction in picture contrast. This allows images to be viewed from various positions and angles.
The LMD-1530W can display various area markers, including a centre marker and aspect markers. The brightness of these markers can be selected from three different levels: white, grey, and dark grey. Users can also select either a black or gray matte to fill the outer area of the aspect markers. These flexible marker controls, together with the choice of many different aspect markers, make the LMD-1530W extremely convenient display devices for a variety of shooting scenarios.
Users can select from high, low, or preset colour temperatures. A variety of gamma modes can also be selected.
The scan size can be selected from 5% over-scan and -3% under-scan modes. The aspect ratio can be switched between 16:9 and 4:3 according to the input signal.
The LMD-1530W comes equipped with a tally lamp that can be lit via a parallel remote connector. The status of the signal displayed on the monitor can be identified by the tally colour: red, green, or amber.
The LMD-1530W can be controlled remotely via their parallel remote connectors. In the remote menu, there are 17 functions (such as the ability to switch input signals), of which seven can be allocated to the remote connector.
The LMD-1530W is equipped with a speaker (0.5 W), which enables the user to monitor audio.
The key-inhibit function helps prevent inadvertent operation from the control panel.
The scan aspect ratio can be switched between 4:3 and 16:9.
The LMD-1530W (7U-high) can be mounted in a 19-inch EIA standard rack using optional MB-533 Mounting Bracket.
The LMD-1530W can easily be mounted (100 x 100 mm pitch) on a wall or ceiling.
